Linear Front-and-Rear Transfer

Stock #: 5584

Model: Front-and-Rear Transfer

Serial #: N/A

Year: 2025

Material Passline Height Over Floor Customized to customer requirements

Transfer Rails Customized to customer requirements

Auxiliary Parking Height Customized to customer requirements

Bolster Size Suitable for bolsters 3657.6 mm (144 in) to 5588 mm (220 in)

Parts & Tooling 350 lbs at max. rate

X Axis #Motors 2

Y Axis #Motors 2

Z Axis #Motors 2

Lubrication System Manual, can be upgraded to Automatic

Pitch Axis: X Acceleration: 1.1 G, Full Pitch: 2540 mm (100 in), Forward Pitch: 1270 mm (50 in), Reverse Pitch: 1270 mm (50 in)

Grip Axis: Y Acceleration: 1.0 G, Front Grip Stroke: 610 mm (24.0 in), Rear Grip Stroke: 610 mm (24.0 in)

Lift Axis: Z Acceleration: 0.9 G, Total Lift Stroke: 610 mm (24.0 in)

Request a quote

Can be retrofitted to new or existing presses
Can be integrated with servo, mechanical, or hydraulic presses
Independent motion functionality on front and rear transfer units
HMI is multi-language supported
2-D, 3-D & Pick and place, Crossbar motion Capability
Up to 6 motion positions per axes of motion per one press revolution included in base system
Part Tracking, Miss-grips, Empty Station insertion / removal, line empty, line fill functionality
Transfer Motion Curves are infinitely programmable
Schematics, operator manuals, and maintenance manuals
integrated onto HMI
200 tooling recipe storage
Air-Conditioned Panels
Intelligent error messaging
Touch Screen Control with password protection
Recipe optimization software
Off-line Transfer Curve generator with output to AutoCAD with interference drawings
Die ID signal acceptance from Press Control via Ethernet
IO Link Network
EWON remote access package

Not Finding What You're Looking For?